Leeco Le2 LCD Display X526 With Touch Screen Digitizer Glass Combo

This video shows how to replace the broken display in Le2 X526 easily at home. It is very easy to replace the Le2 display at home and we are posting a video to show you how to do it. Along with the display, we will also send pasting glue for your convenience so you can do this at your home easily. Please make sure that you do this very carefully.

The glue required to paste the display comes along with the display for no extra charge. You can also get 10% discount on online payments and adhesive/glue to paste the display at completely free of charge.

Q: How much does it cost to replace a broken Le2 X526 display in India?

The price of a 100% original LeEco Le2 X526 display replacement is around Rs 2200-2500. If you buy a first copy screen replacement, then the combo costs about Rs 1300-1500 in India. You may have to pay additional repairing charges on top of the display’s price to a mechanic.

Q: What is the most common problem faced by customers?

Many customers order the Le2 display, and after receiving the parcel, they call us and say that the new display is not working. It is the most common problem faced by customers, and the actual fault is not with the display, but customers do it wrong.

Many customers connect the new display to the motherboard without turning off the phone first. Please note that If you connect the new Le2 display to your phone when the phone is already turned On, you’ll see a black light, and you’ll not see any graphics on the screen.

To overcome this problem, please disconnect the battery from the motherboard and reconnect it again. Alternatively, keep the power buttons pressed for 15 seconds and release it when the phone vibrates. This action will reboot your phone without disconnecting the battery. Once the phone reboots, the new display will work 100% perfectly without any issues.

Q: How can I test the display before installing it permanently?

To test the new display, connect it to your phone’s motherboard, and turn on the device. At this point, don’t affix the screen on your phone or tamper with the screen guard or seals. You can easily test the display without fixing it, and once you are satisfied after testing the display, you can paste it on your phone.

Q: Can I install the Le2 X526 display myself at home? 

We think that the Le2 display is the easiest screen to install at home. You need to dismantle the screen from the front side and fix a new one easily. On the top side of this page, we have posted a video that demonstrates the screen replacement procedure. We hope, by watching the video, you can easily replace the display at home.

Q: How do you test the new Le2 display before shipping to customers?

It is crucial to test the screens before shipping to the customers; otherwise, the defective screens’ ratio will rise exponentially. To overcome this problem, we test our screens in two different phases. Our OEM supplier tests the screens on a machine that has a 99% success rate in the first phase, and then they send the screens to us.

When we receive the new batch of the screens, we use an actual Le2 motherboard to test each display. The process of testing each display on the motherboard consumes much more time, but after following this testing procedure, the defect rate is 0%. That is because we use the same phone’s motherboard as our customer is using, and all the chances of a defective screen are ruled out here.

Q: Do you also provide the display installation services?

No. We function as a mobile phone parts dealer and don’t do the actual installation of the product. To fix the new screen on your phone, you will need to visit a mechanic’s shop who will ask you for installation charges up to Rs 200 and install the display on your phone.

Q: Can you provide some precautionary guidance for self replacement at home? 

We have fixed thousands of screens (for our local customers) for the said model, and we can undoubtedly furnish some helpful tips for you :

Always Cleanup the Frame and Corners

Always make sure to clean up the frame all-around before you stick the new screen into it. You also need to blow off the dust from the frame; even the smallest particles shouldn’t be there. If you leave the dust and place a new display over it, very soon, the dust particles will create pressure on the backside reflector of the display, and yellow/white spots will start to appear.

Don’t use too much glue to stick the display.

We know that you want to affix the display very well, so it doesn’t bulge out after a few days. Still, you shouldn’t use too much glue to paste the display. The glue is in liquid form, and if you use too much amount, It can sneakily go inside the display reflector and create black spots in the display. For this reason, apply a controlled amount of glue all over the frame (excluding the proximity sensor, front camera, etc.), let it dry a bit, and then paste the new screen.

Make sure that you don’t apply pressure on the display.

Some newbies apply extreme pressure to the display to stick it properly and end up damaging the display. Please note that the Le2 screen is a fragile part, and It can’t withstand excessive pressure. So please be gentle and don’t hastily do anything.

Don’t try to paste the new display in a dented frame.

If the frame’s corners are bent, curved, or misshaped, please don’t try to affix the display just yet. First, you need to shape the corners properly, and only then you can affix the display. To reshape the corners, you can use a screwdriver or other similar equipment to give them a round shape. If you try to fix the display in bent corners, the display will not level properly, and then you’ll try to press the display to fix it, and the display will break.

Q: What if I receive a damaged display inside the parcel?

We pack your products securely in sturdy plastic boxes, and so far, we’ve never faced a case of damage in transit. Still, if you overly worry about the damage during transit, you can always record an unboxing video when you open the parcel. If you find any anomalies, send the video to us, and we’ll provide a free replacement to you.

Q: What if you send me an empty box and cheat me?

We don’t like to do business with customers having a skeptical mindset. Our resources are limited, and we can’t use them to butter up the customers as we have got much better things to do. If you are doing business with anyone, you should have some faith.

We understand that sometimes that happens in online business, and there are some crooks. However, we don’t have a vendor system, and everything is handled by one company, and that is us. We are the sole entity doing business on this platform, Touch LCD Baba.

We don’t have different sellers on our platform, and we can better control everything. Each parcel is checked by three staff members in a row and then packed under camera surveillance. We have never had such a case before and will never be in the future. You can always record an unboxing video of the parcel, just for your satisfaction.

All the products supplied by us come with 30 days return, refund, and replacement guarantee. To return a product, It should be in the same condition as we sent. You can’t use or fix the items If you want to return them. For complete details about Shipping and Returns, please click here.