If you are facing unusual problems with your phone because of a worn-out battery, we can provide a new battery of Zenfone Max Pro M1. You can use this battery to replace the problematic old battery. If the problem is indeed related to the battery itself, it will resolve without any doubt. We urge you to read the complete information on this page so that you can make an informed decision.
Zenfone Max Pro M1 battery is not working properly
A mobile phone battery will not stop working all of a sudden. First, you’ll see some early signs of a worn-out battery, and then issues will compound. You might be wondering about how you can know about the battery issues. Here, we will tell you about some signals which indicate a bad battery :
- The battery is draining very fast, even in the standby mode.
- You see a different battery charge percentage every time you lock/unlock the phone.
- Sometimes the battery shows 100% charge and then drops to 20% or so all of a sudden.
- The battery is puffed up, or it is not taking charge.
- Due to the prolonged use of battery for more than two years, its capacity is down naturally.
- The phone turns off automatically inside the pocket without your knowledge.
- At random times, the phone reboots itself and it keeps happening without any explanation.
You might need to replace the Zenfone Max Pro M1 battery due to other issues that might not be listed here. Sometimes while repairing the phone, the battery flex cable gets damaged, and you might need to buy a brand new battery. If for any reason, the Zenfone Max Pro M1 battery is not in usable condition, you can buy a new one and replace it.
Battery Related Issue Might be coming from other parts of the phone
Sometimes a misdiagnosis can happen, and you may be convinced into replacing the battery, but the source of the problem can be different. Even after replacing the battery, the issues might not fix and need an additional diagnosis. These are some conditions which can disguise the battery problem :
Use of duplicate charging connector
If you have replaced the charging connector recently and only after that, you are having charging issues, most probably the connector or the charging sub-board used by the mechanic is duplicate and not working as desired. The fault is related to the charging sub-board while you might think its a battery problem.
Use of a duplicate charger
Sometimes, you may use a duplicate charger to charge the battery, and it could result in an adverse effect. When customers have lost the original charger, they will bring in any duplicate charger, and then charging issues will start. The battery will not charge sufficiently or drain very fast. It happens because the charger is not compatible with the battery and not passing enough current to charge the battery in a proper way.
Bad flex that connects from the motherboard to charging sub-board
There is a charging flex that connects from the motherboard to the charging sub-board. Sometimes, that flex cable can go bad, which results in strange issues like battery not charging or reverse charging, etc. It is also not a battery issue.
Not understanding the battery capacity properly
The most common issue is the customer’s misbelief on battery capacity. Due to the rise of social media, customers install various applications on the phone and don’t realize that battery is not a powerhouse. If you use battery peckish applications, the battery will drain much faster and you will run into battery issues.